EVO ONE
All-in-One Wireless Streaming Speaker
1.499,00 €
Ganz egal, ob du deine alte Plattensammlung wieder hervorgekramt hast oder die Vinyl-Renaissance miterleben willst, jetzt bietet sich dir ein einmaliges Musikerlebnis, sobald die Nadel dein Lieblingsalbum berührt. Der Solo Phono-Vorverstärker erhält die einzigartige Wärme des Schallplattenklangs durch ein hochmodernes Schaltnetzteil und ein neues, oberflächenmontiertes Platinenlayout, das unerwünschte Geräusche verringert.
Aufgrund der niederpegeligen Signale, die ein Plattenspieler erzeugt, können nicht alle Hi-Fi-Verstärker direkt mit einem Plattenspieler verbunden werden. Der Phono-Vorverstärker verstärkt dieses Signal so, dass eine Endstufe damit arbeiten kann. Hier kann es aber leicht zu zusätzlichen Geräuschen kommen.
Aus diesem Grund haben wir den Solo rund um außerordentliche Komponenten entwickelt, die einen warmen und detailreichen, Schallplatten-typischen Sound liefern, ohne das Signal von deinem Moving-Magnet-System zu verzerren. Das Schaltnetzteil erhöht die Leistung, da außerhalb der hörbaren Frequenz geschaltet wird, was zu deutlich weniger Brummen führt; ein neues Platinenlayout verringert Geräusche durch oberflächenmontierte Komponenten.
Wenn einige Platten in deiner Sammlung schon abgenutzt sind, unterdrückt der Subsonic-Filter niederfrequentes Brummen, das durch Unregelmäßigkeiten auf deiner Schallplatte entstehen kann. Hinzu kommt der Balanceregler, der potenzielle Unausgewogenheiten des Tonabnehmers handhabt (die sonst zu einem Unterschied zwischen linken und rechten Kanälen führen könnten). Das Ergebnis ist ein facettenreiches Erlebnis mit akkuratem Klangbild.
Mit weniger als einem halben Watt Standby-Stromverbrauch und automatischer Abschaltung nach 20 Minuten Nichtgebrauch ist der Solo Phono-Vorverstärker im Herzen grün. Dadurch erhält das Gerät außerdem dieselbe weltweite Spannung und kann überall auf der Welt eingesetzt werden.
MAX. STROMVERBRAUCH | 10 W |
VERSTÄRKUNG BEI 1 KHZ | 39 dB |
NENNLEISTUNG | 300 mV |
EMPFINDLICHKEIT BEI NENNLEISTUNG | 3,35 mV |
EIGENRAUSCHEN (A-GEWICHTUNG) | ~0,09 uV |
RIAA-KURVENGENAUIGKEIT | +/- 0,65 dB 30 Hz - 20 kHz |
SIGNAL-RAUSCH-VERHÄLTNIS GEERDETE EINGÄNGE REF. 1 V AUSGANG (20 HZ - 20 KHZ BW) | > 90 dB |
THD+N 1 KHZ (20 - 20 KHZ BW) | < 0,0025 % |
EINGANGSIMPEDANZ | 47k Ohm |
EINGANGSKAPAZITÄT | 100 pF |
ÜBERLASTBEREICH | > 30 dB |
CROSSTALK BEI 10 KHZ | > 85 dB |
MASSE (H x B x T) | 48 x 176 x 132 mm |
GEWICHT | 0,68 kg |
Was looking for a pre amp for my technics 1210 mk2, have always run it through pioneer mixers in the past and wanted to try a studio grade audio path. I chose the above Cambridge unit because of its simplicity, but let me tell you that coupled with a moving magnet cartridge for the Technics the sound is a whole new level. Louder , more detail, mojo and 3D it’s all there. Highly recommended.
Dear Valued Customer
Thank you for your wonderful review! We're delighted to hear that you chose our ALVA Solo preamp to complement your Technics 1210 mk2 turntable and that you're experiencing a whole new level of sound quality.It's fantastic to know that you're enjoying the increased volume detail and added depth and dimensionality (mojo and 3D) that our preamp brings to your listening experience.
We're pleased that you appreciate the simplicity of our unit while still achieving studio-grade audio quality.Your recommendation means a lot to us and we're thrilled that you're satisfied with your purchase.
Thank you for choosing Cambridge Audio and we hope you continue to enjoy your enhanced listening journey with our products!Warm regards
Cambridge Audio Customer Support
The instructions were a joke. They included 2 power cords with nothing in the instructions about it. They looked exactly identical, but they did have stickers. One said "JP" and the other said "US/CA". I assumed I should use the US one because I am in the US, but with what happened next, maybe not. I hooked everything up and plugged in the pre-amp. I heard a pop and not only did the pre-amp not work, it fried my receiver. I could cry.
Dear Valued CustomerWe sincerely apologize for any inconvenience you've experienced with Alva Solo.
Your satisfaction is of utmost importance to us and we are committed to resolving any issues you may have encountered.To better understand your specific situation and ensure we provide the most suitable solution we kindly request that you reach out to our support agents via our support site.
You can contact us directly at https://www.cambridgeaudio.com/gbr/en/contact.Rest assured our team is dedicated to assisting you promptly and efficiently.
Thank you for your understanding and cooperation.Warm regards
Cambridge Audio Customer Support
No tubes, no tone control, just pure clean audio bliss as the it should be
Dear Valued Customer
Thank you for such a positive review and more importantly thanks for your trust in choosing Cambridge Audio products. We hope that it continues to bring you many hours of listening happiness.Kind Regards
Cambridge Audio Customer Support
A small cost for a big improvement!